Remote Cube Wi-Fi Wireless Monitor
Module for Solar Inverter
5.31 * 3.11 * 1.14 in.
(135 * 79 * 29mm)
2.47 oz. (70 g)
This remote Cube Wi-Fi wireless monitor module for solar inverter is a plug-and-play accessory. It works on select solar inverters and allows users to monitor the status of the solar system via a Wi-Fi network.
The Cube WiFi module has a phone APP called PVbutler Monitor, the data uploading and receiving is supported by the PVbutler server, this service is offered to our customers for free.
With the Cube WiFi, users can monitor a PV system from either from the website (server.pvbutler.com) or their mobile phone APP anytime, anywhere.
The CUBE WiFi remote kit also allows the user to remotely turn on and off the inverter AC output power.
Each Wi-Fi kit can only monitor one inverter.
The CUBE WiFi currently supports below solar inverters and solar chargers:
3KW 24V Off-Grid Inverter
3KW 48V Off-Grid Inverter
6KW 48V Off-Grid Inverter
12KW 48V Off-Grid Inverter
Features:
Easy to Operate
Plug-and-play, simple commissioning
Remote firmware update for supporting inverter models (Not Available for now)
Free online monitoring via web server or cell phones
Specifications:
Wireless Parameters:
Certification: FCC/CE
Wireless Type: WiFi
Wireless Standard: 802.11 b/g/n
Transmit Power 802.11b: +20dBm(Max.); 802.11g: +18dBm(Max.); 802.11n: +15dBm(Max.)
Receiver Sensitivity: 802.11b: -89dBm(Max.); 802.11g: -81dBm(Max.); 802.11n: -71dBm(Max.)
Certification: FCC/CE
Wireless Type: WiFi
Wireless Standard: 802.11 b/g/n
Transmit Power 802.11b: +20dBm(Max.); 802.11g: +18dBm(Max.); 802.11n: +15dBm(Max.)
Receiver Sensitivity: 802.11b: -89dBm(Max.); 802.11g: -81dBm(Max.); 802.11n: -71dBm(Max.)
Hardware/Software Parameters:
Data Interface: UART: 9600bps; Ethernet 100Mbps
Operating Voltage: 5V (+/-15%)
Operating Current: 100mA — 300mA
Operating Temperature: -13F~131F (-25C~+55C)
Storage Temperature: -22F~140F (-30C~+60C)
Network Type: AP (Acess Point); Station Mode (with Soft AP) Security Mechanisms: WEP / WPA-PSK/ WPA2-PSK / WAPI Encryption: WEP64/ WEP128 / TKIP / AES
WLAN Default IP: 192.168.10.100
Data Interface: UART: 9600bps; Ethernet 100Mbps
Operating Voltage: 5V (+/-15%)
Operating Current: 100mA — 300mA
Operating Temperature: -13F~131F (-25C~+55C)
Storage Temperature: -22F~140F (-30C~+60C)
Network Type: AP (Acess Point); Station Mode (with Soft AP) Security Mechanisms: WEP / WPA-PSK/ WPA2-PSK / WAPI Encryption: WEP64/ WEP128 / TKIP / AES
WLAN Default IP: 192.168.10.100
Data Interface: UART: 9600bps; Ethernet 100Mbps
Operating Voltage: 5V (+/-15%)
Operating Current: 100mA — 300mA
Operating Temperature: -13F~131F (-25C~+55C)
Storage Temperature: -22F~140F (-30C~+60C)
Network Type: AP (Acess Point); Station Mode (with Soft AP) Security Mechanisms: WEP / WPA-PSK/ WPA2-PSK / WAPI Encryption: WEP64/ WEP128 / TKIP / AES
WLAN Default IP: 192.168.10.100
Data Interface: UART: 9600bps; Ethernet 100Mbps
Operating Voltage: 5V (+/-15%)
Operating Current: 100mA — 300mA
Operating Temperature: -13F~131F (-25C~+55C)
Storage Temperature: -22F~140F (-30C~+60C)
Network Type: AP (Acess Point); Station Mode (with Soft AP) Security Mechanisms: WEP / WPA-PSK/ WPA2-PSK / WAPI Encryption: WEP64/ WEP128 / TKIP / AES
WLAN Default IP: 192.168.10.100
Application Parameters:
Online Server. Pvbutler
Inverter Communication: RS232 (Modbus RTU Protocol)
Sever Communication: WiFi via router (Modbus TCP protocol)
Supported Routers: Wireless router (Include 3G router)
User Configuration Interface: Wireless web server (Internet Browser)
Max. Communication Range: 100m
Data Transfer Interval: 5 minutes
Default Server URL: server.pvbutler.com
