Shopping Bag
 >  Fortune 25Ah 3.2V 2C
Aluminum Encased Battery
Lithium LiFePO4
<b>Fortune 25Ah 3.2V 2C</b><br>Aluminum Encased Battery<br>Lithium LiFePO4
25Ah Lithium LiFePO4 LFP Aluminum Shell Battery Pack

Fortune 25Ah 3.2V 2C
Aluminum Encased Battery
Lithium LiFePO4

review
2 Review(s)
5
Price for 1 Each: $29.40
Part Number:ETS-25Ah-Fortune-Aluminum

Choose Options

25Ah Lithium LiFePO4 LFP Aluminum Shell Battery
Shipping Method?
Delivery Date Needed?
Special Instructions?
help
*We'll ask for shipping info at checkout
Quantity Pricing
Quantity
Price
  • 4 - 15
  • $29.40
  • 16 - 23
  • $29.00
  • 24 - 47
  • $28.60
  • 48 - 95
  • $28.20
  • 96+
  • $27.80

25Ah, 3V-3.2V-3.65V, 2C

Aluminum Shell Batteries

Lithium LiFePO4

2.7L * 1.0W * 7.1H in

70 * 27 * 180 mm

1.5 Lbs. / 0.7 Kg



Two standard and one non-standard busbars per cell are included in the price.



Quantity

Ship from Salt Lake City Stock*

96+

$27.80

48-95

$28.20

24-47

$28.60

16-23

$29.00

4-15

$29.40


*While supplies last.


Note: All Fortune cells are warrantied for up to two years when operated with a commercially available Battery Management System ‘BMS’ and recharged with a charging system designed to recharge LiFePO4 batteries.




NOMINAL/MINIMUM CAPACITY

25Ah @ 1/3C Discharge

MAX DISCHARGE CURRENT (continuous)

75A (3C)

STANDARD CHARGE CURRENT

12.5A (0.5C)

MAX PULSE CHARGE CURRENT (<10 sec)

50A (2C)

MAX PULSE DISCHARGE CURRENT (<30 sec)

125A (5C)

NOMINAL VOLTAGE

3.2

SUGGESTED MAX CHARGE VOLTAGE

3.65

END OF DISCHARGE VOLTAGE

2.2

CYCLE LIFE AT STANDARD (80%)

>2500

INTERNAL RESISTANCE/IMPEDANCE (milliohms)

1.2

SUGGESTED CHARGING CURVE

Constant Amperage to 3.65V,

Constant Voltage,

Decrease Amperage,

Stop at 1A Charge

CHARGE WORKING TEMP F (C)

32 to 122 (-10 to 50)

DISCHARGE WORKING TEMP F (C)

-4 to 122 (-20 to 55)

STORAGE TEMP F (C)

14 to 113 (-10 to 45)

ENERGY TYPE

3V-3.2V-3.65V,

25Ah Lithium, LiFePO4,

LFP Aluminum

Shell Battery



Connect your new 25Ah lithium, LiFePO4, LFP aluminum shell battery pack together in parallel (neg to neg and pos to pos) for more than 8 hours before connecting in series and charging. This gives your new batteries time to balance their voltages.


It is also strongly suggested that you use a BMS or balancing system.


Always use caution when working with high voltages.

4 Stars
Great product but beware shipping
Great product but shipping was expensive to east coast. Shipping costs not known until you order.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from Maryland . on 1/12/2021
4/5
5 Stars
Taste test for lifeP04. Yummy
This was my first try with anything solar or diy cells, I put 4 into a Milwaukee packout with Victron inverter all being controlled by an Electrodacus Sbms0. All cells measured within .01v and serial numbers for three cells were like super close with one being off the last 5 digits. so I put it #2. I did the parallel connect like they say. Let me tell you what I’ve been beating the hell out of these as far as cycles and daily 20A pulls then charging with 30A. They take 30 for a min then set in at 19A until 3.5v with 2A until 3.55v I’m leaning a lot. Mostly don’t believe anything after 3.1v they fall fast AF. I’ll be buying more, then but bigger, and why would I try to save a few bucks online? Everything came packed perfectly cells looked wiped down for dna even. These are like a taste tester though, need bigger.
Did you find this helpful? 
Reviewed by:  from Belton. on 11/18/2020
5/5