Energetech
Solar
180Ah, 3.2V, 2C
CA180FI
CALB Lithium LiFePO4
UL Certified!
Prismatic Cell Batteries
USA or China Stock
7.1L * 2.8W * 11H in
180 * 71 * 280 mm
12.6 Lbs. / 5.7 Kg
**USA STOCK**
Comes with bolts and washers!
2 Year Manufacturer’s Warranty!
Prices shown do not include any tariffs or U.S. Customs duties that may be imposed.
The buyer shall be responsible to arrange and pay for the overland shipping of these batteries from Chino, California, to their address.
Note: All CALB cells are warrantied for up to two years when operated with a commercially available Battery Management System ‘BMS’ and recharged with a charging system designed to recharge LiFePO4 batteries.
Quantity
USA Stock Price Each (with Bus Bars)
128+
$161.00*
48-127
$171.00
24-47
$173.00
8-23
$174.00
1-7
$176.00
*Special Limited Promotional Price – Free Shipping inside the Continental USA
Specifications:
NOMINAL/MINIMUM CAPACITY
180Ah @ 0.3C
STANDARD DISCHARGE CURRENT/AMPERAGE
0.5C-90
MAX DISCHARGE CURRENT/AMPERAGE
2C-360
STANDARD CHARGE CURRENT/AMPERAGE
0.3C-54
MAX CHARGE CURRENT/AMPERAGE
1C-180
MAX CHARGE VOLTAGE
3.65
DISCHARGE CUT-OFF VOLTAGE
2.5
CYCLE LIFE (80%)
2000
SELF DISCHARGE RATE (30 DAYS)
3%
INTERNAL RESISTANCE (m?)
0.6
CHARGE WORKING TEMP (F)
32 to 113
DISCHARGE WORKING TEMP (F)
-4 to 131
Metric
CHARGE WORKING TEMP (C)
0 to 45
DISCHARGE WORKING TEMP (C)
-20 to 55
ENERGY TYPE
CA180FI 180Ah CALB
Lithium LiFePO4,
Prismatic Cell Battery
The difference between SE and CA series batteries is the SE has higher energy density, and the CA has internal heat separators and 2-3% higher series/pack capacity.
Connect your new CA180FI 180Ah lithium, LiFePO4, prismatic cell battery pack together in parallel (neg to neg and pos to pos) for 24 hours before connecting in series and charging. This gives your new batteries time to balance their voltages to a degree.
It is also strongly suggested that you use a BMS or balancing system.
Always use caution when working with your new CA180FI 180Ah lithium battery pack.
Battery Type
Busbar P/N
Standard 5 Plate
busbar spec.
Bolt Spec.
Pitch (mm)
Torque N*M
Torque Ft-lbs
Standard
Non-Standard
SE40AHA
CA40FI
CA40V46
CA40H51*
The last two numbers are the center post to center post distance (mm).
For example:
CA35V49
distance is 49mm
M6*16/M6*20
1.00
9
6
CA60FI
CA60V41
CA60H52
SE60AHA
SE60AH50
SE60AH61*
SE70AHA
SE70AH60.5
SE70AH53*
SE100AHA
CA100FI
CA100V67
CA100H61
M8*16/M8*20
1.25
20
14
SE130Ah
SE130AH57
SE130AH76
SE180Ah
CA180V71
CA180H76*
SE400Ah
CA400FI
CA400V71
CA400H210
M14*16/M14*20
2.00
60
44
- ONLY CA100 AND CA180 AVAILABLE FROM USA STOCK
Select a row below to filter reviews.
5.0
