1.5kW Inverter
Either 12V or 24V
DC Input
120VAC
50Hz 60Hz Output
50A or
30A Battery Charger
Pure
Sine Wave
Works
With Lithium or Lead Acid Batteries
17.5L * 8.5W * 7H in
442 * 218 * 179 mm
37.5 Lbs.
/ 17 Kg*
*Please contact us if
weight is a problem
View the APC Inverter
Manual Here with mechanical drawings, features, and performance
information!
Pricing Options:
· $330 – Total cost with ocean freight shipping to nearest International seaport in the Continental USA
· $450 – Total cost with air freight shipping to nearest International airport in the Continental USA
· $450 – USA Stock cost
Call for pricing above 5 each at (801) 566-5678
Please consider extra accessories in the options above – Remote Control Module ($70), Battery Temperature Sensor (BTS) ($16).
Features:
·
Power output: 1,500W
continuous, 4,500W peak
·
50Hz/60Hz output frequency
·
Pure sine wave output, <10%
under full linear load Total Harmonic Distortion (THD)
·
Nominal Efficiency: >88%
(Peak)
·
Line Mode Efficiency: >95%
·
Typical Transfer Time: 10ms
(Max)
·
Auto Generator Start
·
High overload ability up to
300% of rated power (20 sec)
·
Low quiescent current, low
power “Power Saving Mode” to conserve energy
·
4-step intelligent battery
charger, PFC (Power Factor Correction) for charger
·
8 pre-set battery type selector
switch plus de-sulphation for totally flat batteries
·
Powerful charge rate of up to
120Amps, selectable from 0%-100%
·
10 ms typical transfer time
between battery and AC, guarantees power continuity
·
Smart LED remote control panel
·
AC voltage regulation available
·
15s delay before transfer when
AC resumes, extra protection for loads when used with generator
·
Allows start up and through
power with depleted batteries
·
Multiple controlled cooling
fans
·
Extensive protections against
various harsh situations
·
13VDC battery recovery point,
dedicated for renewable energy systems
Click
for instructions for connecting the LCD Remote Control Module
Click
for description of the BTS – Battery Temperature Sensor
