12V or 24V 40A MPPT
For Flooded, SLA, AGM, Gel, Lead Acid Battery
and LiFePO4 (Lithium) Battery Packs
Solar Charge Controller
With Remote Communication Capability
9.4 * 6.8 * 2.8 in. (238 * 173 * 72 mm)
4.4 Lbs. (2 Kg)
3 Year Manufacturer’s Warranty!
Note:
This Solar Charge Controller has a unique feature that will allow it to restart
a lead-acid battery pack.
These Charge Controllers can operate in parallel.
These solar charge controllers have a Bluetooth function included to monitor the working status of the controller and its whole system. The BT-1 and BT-2 Bluetooth adapter is used to extend Bluetooth communication function of the Bluetooth module. Mobile phone app can be used for wireless monitoring, parameters setting, and data view.
Click here to see the detailed User Manual
Features:
· Advanced dual-peak or multi-peak tracking technology.
· Built-in algorithm for maximum power point tracking to significantly improve the energy utilization efficiency of photovoltaic systems.
· Charging efficiency 15%-20% higher than traditional PWM solar charge controllers.
· Combination of multiple tracking algorithms that can track the optimum working point of I-V curve accurately in a very short time.
· MPPT efficiency can be as high as 99.9%
· Advanced digital power supply technologies to raise the circuit’s energy conversion efficiency to as high as 98%.
· Charging program options for different types of batteries including gel batteries, sealed batteries, open batteries, lithium batteries, etc.
· Current-limiting charging mode. When the power of a solar panel is too large, and the charging current is greater than rated current, the solar charge controller automatically reduces charging power to bring the charging current to the rated level.
· Instantaneous large current startup of capacitive loads.
· Automatic identification of battery voltage.
· LED fault indicators and an LCD screen to display abnormality information to help users quickly identify system failures.
· Supports data storage for up to a year.
· LCD screen display to enable users to view device operation data and status and modify controller parameters.
· Standard Modbus protocol to meet communication needs for various occasions.
· Built-in mechanism for over-temperature protection. When the temperature exceeds the set value, the charging current falls linearly with temperature, therefore slowing down the rise of controller temperature and avoiding controller damage from overheating.
· Temperature compensation function to automatically adjust charging and discharging parameters to extend battery service life.
· TVS lightning protection.
Technical Specifications:
· Battery Voltage/Power: 12V/550W, 24V/1100W
· Max Solar Input Voltage: 100V
· Rated Charge Current: 40A
· Rated Load Current: 20A
· No-load Loss: 0.7 W to 1.2 W
· Battery Voltage: 9V to 35V
· IP Rating: IP32
· Conversion Efficiency: <98%
· MPPT Tracking Efficiency: >99%
· Working Temperature: -31F~113F (-35C~+45C)
Mobile Bluetooth APP Wireless Monitoring Features:
·
The controller supports a built-in Bluetooth
module or external adapter, which is plug and play and easy to set up.
·
Bluetooth module applies a Bluetooth 4.0 low
energy technology, providing rapid communication and strong anti-interference
capability.
·
Communication distance is up to 15 meters (49 ft).
·
The rich data display and setting functions meet
the wireless monitoring requirements for solar controller data.
BT-1 and BT-2 Features:
·
Adds wireless monitoring function onto the solar
charge controller.
·
Supports mobile phone app, plug and play, with
simple settings.
·
High performance and low power consumption of the
Bluetooth special chip.
·
Adopts Bluetooth 4.0 and BLE technology, has the
characteristics of rapid communication and strong anti-jamming capability.
·
Without external power supply (power supply
directly by the communication port).
BT-1 and BT-2 Specifications:
·
Input Voltage: 5V-12V
·
Stand-by Power Consumption: 0.04W
·
Run Power Consumption: 0.05W
·
Communication Distance: <15m (49 ft)
·
Serial Port Baud Rate: Fixed baud rate 9600bps
·
Communication Methods: RS232 (BT-1) and TTL (BT-2)
·
Interface Type: RJ12 (BT-1) and PH2.0 (BT-2)
·
Connecting Line: Standard Ethernet Cable (parallel
line)
·
Size: 2.6*2.0*0.61 in. (66*51*15.5mm) (BT-1) or 2.6*1.4*0.61
in. (67.3*36*15.5mm) (BT-2)
·
Installation Dimension: 2.3*0.47 in. (57.8*12mm)
(BT-1) or 2.28*0.47 in. (57.8*12mm) (BT-2)
·
Operating Temperature: -4F~167F (-20C~75C)
·
Level of Protection: IP67
·
Net Weight: 4.2 oz. (120g)
